Sony DSC-W5 - Manual (Page 32)

32
For details on the operation
t
page 28
z If the subject is out of focus
When shooting with the subject at the edge of the frame (or the screen), or when using [Center AF]. the
camera may not focus on a subject at the edge of the frame. In a case like this, do as follows.
1 Recompose the shot so that the subject is centered in the AF range finder, and press the shutter
button halfway down to focus on the subject (AF lock).
As long as you do not press the shutter button fully down, you can retry the procedure as many
times as you want.
2 When the AE/AF lock indicator stops flashing and remains on, return to the fully composed shot,
and press the shutter button fully down.
Selects the metering mode that sets which part of the subject to measure to determine the
exposure.
• For details on the exposure t page 11
• When using spot metering or center-weighted metering, setting [9] (Focus) to [Center AF] is
recommended to focus on the metering position (page 31).
(Metering Mode)
Spot (Spot metering)
(
)
Measures only a part of the subject.
• This function is useful when the subject is backlit or when there
is strong contrast between the subject and the background.
Center (Center-weighted
metering)(
)
Measures the center of the image, and determines the
exposure based on the brightness of the subject there.
Multi (Multi-pattern
metering) Divides into multiple regions and measures each region. The
camera determines a well-balanced exposure.
F2.8 30
VGA
FINE
98 P
S AF
AE/AF lock indicator
AF range finder frame
VGA
FINE
98
S AF
P
F2.8 30
VGA
F2.8 250
98
FINE
SAF
P
Spot metering cross hairs
Positions on the subject.