Computers – Sony DSC-W5 User Manual

Page 81

Advertising
background image

81

Tr

oubl

es
hoot

ing

You have deleted an image by mistake.

•

Once you have deleted an image, you cannot restore it. We recommend that you set protection
on an image (page 38), or set the write-protect switch on the “Memory Stick” to the LOCK
position (page 89) to prevent accidental erasure.

The resizing function does not work.

•

You cannot resize movies and Multi Burst images.

You cannot display a DPOF (Print order) mark.

•

You cannot display DPOF (Print order) marks on movies.

You cannot cut a movie.

•

The movie is not long enough to cut (shorter than about two seconds).

•

Cancel the protection (page 39).

•

Still images cannot be cut.

You do not know if the OS of your computer is compatible with the camera.

•

Check “Recommended computer environment” (page 56) for Windows, and “Recommended
environment” (page 66)
for Macintosh.

You cannot install the USB driver.

•

In Windows 2000, log on as Administrator (authorized Administrators) (page 57).

Your computer does not recognize your camera.

•

Turn on the camera (

t

step 2 in “Read This First”).

•

When the battery level is low, install the charged batteries (

t

step 1 in “Read This First”), or

use the AC Adaptor (not supplied) .

•

Use the supplied USB cable (page 58).

•

Disconnect the USB cable from both the computer and the camera, and connect it again
firmly. Make sure that “USB Mode Normal” is displayed (page 58).

•

Set [USB Connect] to [Normal] in the

(Setup) menu (page 53).

•

Disconnect all equipment other than the keyboard and the mouse from the USB connectors of
your computer.

•

Connect the camera directly to your computer without passing through a USB hub or other
device (page 58).

•

The USB driver is not installed. Install the USB driver (page 57).

•

Your computer does not properly recognize the device because you connected the camera and
your computer with the USB cable before you installed the “USB Driver” from the supplied
CD-ROM. Delete the erroneously recognized device from your computer, then install the
USB driver (see the next item).

Computers

Advertising