Sony KDF-50X30 - Manual (Page 24)

masterpage:3 columns Right
24
D:\WINNT\Profiles\noriko\Desktop\SONY TROY
2\2681559122_Troy2EN\2681559122\01US04INS.fm
KDF-46E2000/KDF-50E2000/KDF-55E2000
2-681-559-12(2)
Satellite Receiver
and Cable/Antenna ❑ SAT signals are selected by the SAT Box connected to the VIDEO
INPUT. TV signals are selected from the signal connected to the
CABLE input.
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
2
Use A/V and S VIDEO cables to connect the satellite receiver’s AUDIO
and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.
3
Use a coaxial cable to connect your cable to the TV’s CABLE jack, or
your antenna to the TV’s VHF/UHF jacks.
✍
If your satellite receiver is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.
1 3
S VIDEO
VIDEO
AUDIO
L (MONO)
R
VIDEO IN
VHF/UHF
CABLE
Satellite receiver
A/V cable
Rear of TV
VIDEO
Satellite
antenna
cable
S VIDEO
S VIDEO cable
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
AUDIO-L
AUDIO-R
Coaxial cable