Sony KDF-50X30 - Manual (Page 25)

masterpage:3 columns Right
25
Conn
ectin
g the
TV
D:\WINNT\Profiles\noriko\Desktop\SONY TROY
2\2681559122_Troy2EN\2681559122\01US04INS.fm
KDF-46E2000/KDF-50E2000/KDF-55E2000
2-681-559-12(2)
Equipment with
HDMI Connection Use this hookup if:
❑ Your equipment has a High-Definition Multimedia Interface (HDMI).
Disconnect all power sources before making any connections.
Using an HDMI cable, connect the equipment’s HDMI OUT jack to the
TV’s HDMI IN (Video 6 or Video 7) jack.
Equipment with DVI
Connection Disconnect all power sources before making any connections.
If you are connecting with DVI-HDTV output, you can connect to the TV’s
HDMI IN (Video 6) jack by using an HDMI-to-DVI cable or an adapter
(both not supplied).
z The HDMI jack
provides both video
and audio signals, so it
is not necessary to
connect an audio cable.
7 6
L R
AUDIO
Rear of TV
HDMI cable
Equipment with HDMI output
✍
When using a HDMI-to-DVI cable or an adapter, be sure to connect
the DVI output connector first; then connect to the HDMI input on
your TV.
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
z When connecting to a
DVI output, audio cable
must be used
simultaneously for the
audio signal. DVI carries
video signal only.
DVI-HDTV
7 6
L R
AUDIO
Rear of TV
HDMI-to-DVI cable
or adapter
Audio cable
Equipment with DVI output
AUDIO-R
AUDIO-L