Step 4: adjusting the lcd screen, The lcd screen – Sony DCR-SR40 User Manual

Page 23

Advertising
background image

23

G

e

tt

in

g

S

ta

rte

d

Open the LCD screen 90 degrees to the
camcorder (1), then rotate it to the best angle
to record or play (2).

• Be careful not to press the buttons on the LCD

frame accidentally, when you open or adjust the
LCD screen.

• If you open the LCD screen 90 degrees to the

camcorder, rotate it 180 degrees to the lens side,
then you can close it with the LCD screen side
facing out. This is convenient during playback
operations.

To turn off the LCD backlight to make
the battery last longer (DCR-SR60/
SR80)

Press and hold DISP/BATT INFO for a few
seconds until

appears.

This setting is practical when you use your
camcorder in bright conditions or when you
want to save battery power. The recorded
image will not be affected by this setting. To
cancel, press and hold DISP/BATT INFO
until

disappears.

• See [LCD SET] - [LCD BRIGHT] (p.61) to adjust

the brightness of the LCD screen.

Step 4: Adjusting the LCD screen

The LCD screen

DISP/BATT INFO

2

180
degrees
(max.)

2

90 degrees
(max.)

1

90 degrees to
the camcorder

Advertising
This manual is related to the following products: