Sony DCR-SR40 - Manual (Page 61)

61
Usi
n
g t
h
e S
e
tu
p i
tem
s
The recorded image will not be affected even
when you change the setting.
x LCD BRIGHT
You can adjust the brightness of the LCD
screen.
1 Adjust the brightness with / .
2 Touch .
x LCD BL LEVEL
You can adjust the brightness of the LCD
screen’s backlight.
B NORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
• When you use the AC Adaptor as the power
source, [BRIGHT] is automatically selected for
the setting.
• When you select [BRIGHT], battery life is
slightly reduced during recording.
x LCD COLOR
You can adjust the color on the LCD screen
with
/ .
x WIDE DISPLAY (DCR-SR40)
You can select how a 16:9 (wide) aspect ratio
image appears on the LCD screen.
B LETTER BOX
Normal setting (standard type of screen)
SQUEZE (Squeeze)
Expands the image vertically if black bands
at the top and bottom in 16:9 (wide) aspect
ratio are undesirable.
See page 42.
You can select data transfer speed used to
transfer data to your computer.
B AUTO
Sends data by switching automatically
between the Hi-Speed USB (USB 2.0) and
the speed corresponding to USB1.1 (full
speed transfer).
FULL SPEED
Sends data corresponding to USB1.1 (full
speed transfer).
You can check the information recorded
automatically (data code) during playback.
B OFF
Data code is not displayed.
DATE/TIME
Displays the date and time of recorded
images.
CAMERA DATA
Displays the camera setting data of recorded
images.
DATE/TIME
1Date
2Time
LCD SET
Low intensity High intensity
TV TYPE (DCR-SR60/SR80)
USB SPEED
DATA CODE
60min 00:00:00
JAN 1 2006
1:12:34
AM