AT&T 2120 - Manual (Page 20)

18
Clock Radio Operation
Using the radio
Basic radio functions
Press
RADIO ON/OFF
to turn the radio on or off. Press
AM/FM
to select a frequency band.
Each time you turn on the radio it automatically tunes
to the last station selected.
Manual tuning
In either AM or FM mode, press the
TUNE
buttons
repeatedly to select a specific frequency.
TUNE +
increases the frequency;
TUNE —
decreases the
frequency.
Station searching
Press and hold either
TUNE
button to automatically
search for stations. When a strong signal is found, the
radio remains tuned to that station. To continue
searching, press and hold either
TUNE
button again.
Radio memory buttons
Memory buttons allow you to tune up to 10 favorite
stations with one button press. Each memory button
can store one AM station and one FM station.
Tune to any station, then follow the steps at left to
store it in a memory button (
M1
through
M5
). After the
station is programmed, you can tune to it directly by
pressing a memory button.
1 RADIO ON/OFF
Press to turn radio on or off.
2 AM/FM
Press to select AM or FM band.
3 TUNE +/-
Press to change frequency. Hold to
search for stations.
Use wheel on side of base
to adjust radio volume.
12:35
560 AM KHz
PM
12:35
96. 0 FM MHz
PM
12:35
97. 0 FM MHz
PM
1 MEMORY
Tune station, then press MEMORY.
2 M3
Press memory button ( M1 , M2 , etc.)
3 MEMORY
Press MEMORY again to save.
12:35
188. 0 FM MHz
PM
12:35
188. 0 3
FM MHz M
PM
12:35
188. 0 3
FM MHz M
PM
NOTE: If electrical power is lost for more than 15 minutes, memory
will be lost and buttons M1 through M5 will have to be reprogrammed.
91-000040-010-000_E2120ManualMP_R0Aug0904.qxd 8/9/2004 10:06 AM Page 18