Sony DSC-M2 - Manual (Page 42)

42
For details on the operation
t
page 32
On the [Multi Burst]
• You can successively play back images shot in the Multi Burst mode using the following procedures:
– To pause/resume: Press z on the control button.
– To play back frame-by-frame: Press b/B in pause mode. Press z to resume playback in series.
• You cannot use the following functions in the Multi Burst mode:
– Flash
– Hybrid shooting
– Inserting the date and time
– Dividing a series of images shot in the Multi Burst mode
– Deleting a frame in a series of images shot in the Multi Burst mode
– Setting the frame interval to a mode other than [1/30] when
(Camera) is set to [Auto]
• When playing back a series of images shot in the Multi Burst mode using a computer or a camera not
equipped with the Multi Burst function, the image is displayed as a single image with 16 frames.
• The image size of images shot in the Multi Burst mode is 1M.
• You may not be able to shoot images in the Multi Burst mode depending on the Scene mode (page 36).
On the [Exp Brktg]
• The flash is set to (No flash).
• The focus and white balance are adjusted for the first image, and these settings are also used for the other
images.
• When the exposure is manually adjusted (page 37), the exposure is shifted based on the adjusted
brightness.
• The recording interval is approximately 0.36 second.
• If the subject is too bright or too dark, you may be unable to shoot properly with the selected bracket
adjustment value.
• You cannot shoot continuous shots in Hybrid.
• You may not be able to shoot images in the Exposure Bracket mode depending on the Scene mode (page
36).
On the [Speed Burst]
• The flash is set to (No flash).
• When recording with the self timer, a series of a maximum of four images is recorded.
• When the battery level is low, or “Memory Stick Duo” is full, the Speed Burst stops.
• You cannot shoot continuous shots in Hybrid.
• You may not be able to shoot images in the Speed Burst mode depending on the Scene mode (page 36).