Using your macintosh computer – Sony NSC-GC1 User Manual

Page 20

Advertising
background image

20

4

Touch [END] on the screen of your
camera.

5

Touch [YES] on the screen of your
camera.

6

Disconnect the USB cable from the
camera and the computer.

b

Notes

• Before turning off your camera, disconnect the

USB cable following the proper procedures
described above.

• Disconnect the USB cable using the proper

procedures described above. Otherwise, files
stored on the “Memory Stick PRO Duo” may
not be updated correctly. Also, disconnecting
the USB cable improperly may cause a
malfunction of the “Memory Stick PRO Duo”.

Using your Macintosh computer

You can copy images to your Macintosh
computer.

• “Picture Motion Browser” is not compatible

with Macintosh computers.

Recommended computer environment

The following environment is
recommended for a computer connected to
the camera.

OS (pre-installed): Mac OS 9.1/9.2/ Mac

OS X(v10.1 to v10.4)

USB jack: Provided as standard
CPU: iMac, eMac, iBook, PowerBook,

Power Mac G3/G4/G5 series, Mac mini

Memory: 64 MB or more (128 MB or

more is recommended)

Hard Disk: Disk space required for

installation: approximately 250 MB

b

Note

• Operations are not guaranteed for all the

recommended computer environments
mentioned above.

• If you connect two or more USB devices to a

single computer at the same time, some devices,
including your camera, may not operate
depending on the types of USB devices you are
using.

• Operations are not guaranteed when using a

USB hub.

• Connecting your camera using a USB interface

that is compatible with Hi-Speed USB (USB 2.0
compliant) allows advanced transfer (high speed
transfer) as this camera is compatible with Hi-
Speed USB (USB 2.0 compliant).

• There are three modes for a USB connection

when connecting a computer, [PictBridge],
[Web Camera] and [Mass Storage] (default
setting) modes. This section describes the [Mass
Storage] as an example. For details on
[PictBridge], see “Network Sharing Camera
Handbook”.

• When your computer resumes from the suspend

or sleep mode, communication between your
camera and your computer may not recover at
the same time.

Advertising