Sony IPT-DS2 - Manual (Page 26)

8-GB
Attaching the camera to this unit
Before attaching the camera
The internal memory and memory card have ˎ
sufficient free space.
Install a fully charged battery pack into the camera. ˎ
Turn off the power of the camera. ˎ
1 Remove the protective cover.
2 Press the release button (dark gray) of this
unit to open the camera clips.
3 Check the “Attachment” item in the table
of compatible functions (page 4). Turn the
camera to face in the desired direction.
Attachment A models according to the ˎ
table of compatible models
Position the camera with its lens facing the
SONY logo on this unit.
Attachment B models according to the ˎ
table of compatible models
Position the camera with its LCD screen facing
the SONY logo on this unit.
4 Align the multi connector at the
bottom of the camera with the multi
connector on this unit. Attach the camera
perpendicularly to the tilt arm of this unit.
5 Slide the camera slowly until it is
positioned almost at the center of this
unit.