Sony IPT-DS2 - Manual (Page 31)

13-GB
Attaching the dedicated
stand
1 Insert the legs of the dedicated stand
firmly into the mount.
2 To set this unit on the dedicated stand,
align the projections on the mount of
the dedicated stand with the tripod
receptacle of this unit.
Notes ¦
Attach the camera to this unit before setting the ˎ
unit on the dedicated stand.
Use the dedicated stand in a level place. ˎ
Do not apply a strong force to the dedicated stand. ˎ
Pressing the button too strongly may cause this ˎ
unit to fall off the dedicated stand.
Hold the camera when operating it to prevent it ˎ
from falling and causing injury.
Keep this unit away from people’s faces, especially ˎ
children’s faces¸ to prevent injury in case it falls.
To use a commercially available tripod
You can use a commercially available tripod instead
of the dedicated stand. However, some tripods
cannot be used depending on the shape of the
camera platform.
Notes ¦
Do not use force to tighten the tripod screw. ˎ
When this unit is attached to a tripod, do not lift ˎ
the unit or swing the tripod around.
Be careful not to pull or exert a force on the foot of ˎ
this unit. Doing so can cause a malfunction.