Sony IPT-DS2 - Manual (Page 29)

11-GB
Shooting using On-
demand shot function
On-demand shot is a function that lets you send
recording instructions to the unit at any time you
like.
You can send instructions to record not only still
images but also Intelligent Sweep Panorama shots
using the pan function of this unit. (Only with
compatible camera models)
Press the On-demand shot button during
automatic shooting or setting screen display.
The self-timer lamp of the camera flashes and face
detection begins. When the camera detects a face
and finishes choosing the composition, there is a fast
beeping and shooting begins.
After finishing the On-demand shot, this unit returns
to automatic shooting mode.
Notes ¦
There is no beep if the camera is set to mute. ˎ
Pressing the button too strongly may cause this ˎ
unit to fall off the dedicated stand.
Tips ¼
Even if the camera cannot find a face, it takes a ˎ
shot.
To cancel On-demand shot during operation, press ˎ
the On-demand shot button once more.
On panorama shooting, you cannot cancel On- ˎ
demand shot after the composition is set.
The camera may not be able to capture panoramic ˎ
images properly if the subject or camera moves
too much. For details, refer to the user’s manual of
your camera.