Sony MFM-HT205 - Manual (Page 31)

31
US
Option menu
You can adjust the following items using the “Option” menu.
• PIP/PAP
• Caption Vision
• Input Sensing
• Language
• Menu Position
• Menu Lock
• Demo Mode
• All Reset
x Setting “PIP” (Picture In Picture) or “PAP”
(Picture And Picture) (for PC 1/PC 2 only)
When the “PIP/PAP Setting” menu is set to “PIP On” or “PAP
On,” pictures from two input sources are displayed on the screen
at the same time. When “PIP On” is set, the main picture is
displayed in full size, and the sub picture is displayed smaller in
the corner of the screen. When “PAP On” is set, two same-size
pictures are displayed in the center of the screen. The left screen
shows the main picture, the right screen shows the sub picture.
Also, you can choose either the sound from the main picture or the
sub picture.
Tip
You can also switch the “PIP” or “PAP” setting by pressing the
button repeatedly.
To switch the PIP or PAP function on and off
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select (Option) and
press the OK button.
The “Option” menu appears on the screen.
3 Press the M/m buttons to select “PIP/PAP” and
press the OK button.
4 Press the M/m buttons to select “PIP/PAP Setting”
and press the OK button.
The “PIP/PAP Setting” menu appears on the screen.
5 Press the M/m buttons to select the desired mode
and press the OK button.
• PIP On:
Pictures from two input sources are displayed
on the screen. The main picture is displayed in
full size, and the sub picture is displayed
smaller in the corner of the screen. You can
select the input for sub picture, the sub picture’s
position, size, and audio input source.
• PAP On: Pictures from two input sources are displayed
on the screen. Two same-size pictures are
displayed in the center of the screen. The left
screen shows the main picture, the right screen
shows the sub picture. You can select the input
for sub picture and audio input source.
• Off: The PIP or PAP function is turned off.
To select the input for sub picture (PIP function: On/
PAP function: On)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select (Option) and
press the OK button.
The “Option” menu appears on the screen.
3 Press the M/m buttons to select “PIP/PAP” and
press the OK button.
4 Press the M/m buttons to select “PIP/PAP Setting”
and press the OK button.
The “PIP/PAP Setting” menu appears on the screen.
5 Press the M/m buttons to select “PIP On” or “PAP
On” and press the OK button.
6 Press the M/m buttons to select “PIP/PAP” and
press the OK button.
The “PIP/PAP” menu appears on the screen.
7 Press the M/m buttons to select the desired input
source and press the OK button.
• TV:
A TV program is displayed in the sub-
picture area.
• COMPONENT: The picture sent from the video
equipment connected to the display’s
video input jacks for COMPONENT is
displayed in the sub-picture area.
• VIDEO 1: The picture sent from the video
equipment connected to the display’s
video input jacks for VIDEO 1 is
displayed in the sub-picture area.
• VIDEO 2: The picture sent from the video
equipment connected to the display’s
video input jacks for VIDEO 2 is
displayed in the sub-picture area.
Option
PIP/PAP
Caption Vision :
Input Sensing : On
Language : English
Menu Position
Menu Lock :
Off
Demo Mode : Off
All Reset
1680 × 1050/60 Hz
Set Exit MENU Select OK
DVI-D: PC 1
Option
1680 × 1050/60 Hz
Set Exit MENU Select OK
PIP/PAP
PIP/PAP Setting : PIP On
PIP/PAP : PAP On
PIP Size : Off
PIP Position
Audio Select :
DVI-D: PC 1