Customizing the player, Making the player move to music – Sony SEP-30BTWHI User Manual
Page 19
SEP-30BT 3-870-834-11(1)
SEP-30BT 3-870-834-11(1)
Notes
If you hold the arms and wheels down, or try to stop motion in any way during motion
playback, the side lamps will light up in red and motion stops.
If you play music near the range of maximum volume level, the speakers vibrate, and the case of
the player vibrates, too. If the arms close (in the course of a motion procedure, or are closed by
hand), the sound may be muffled or distorted.
Motions are reproduced differently depending on the location or surface where the player is
used.
Motions actually reproduced by the player (such as fine movements, slow movements, sudden
starts, sudden stops, spinning) may differ from those same motions previewed on Rolly
Choreographer.
Motions assigned to MP3 variable bit rate format files may not be played correctly.
Enjo
ying Music and M
otion
Using the [Tools] menu of the supplied Rolly Choreographer software, you can customize
or reset the player’s performance. Refer to the Rolly Choreographer Help for details on the
setting operations required.
Items
Set-ups
Rolly
Settings
Operation
Sound
You can set whether to sound the following 3 kinds of sounds or
not. Sounds are set to sound as the default setting.
Startup Sound Setting: This sounds when the power is turned
on, or as an alarm when required.
Operation Sound Setting: This sounds when tracks are
forwarded/reversed, groups are forwarded/reversed, or
playback mode is changed.
Group Voice Guidance Setting: When you change groups, the
selected group number is announced.
Volume
Operation
You can set the player to return automatically to the position it
was before the volume was adjusted, when the player was placed
on a level surface. This item is set to return to original position as
the default setting.
Bluetooth
Communication
You can select the priority, whether for sound quality or
communication stability, for Bluetooth communication.
Communication stability is given the priority as the default
setting.
In addition, you can employ the SCMS-T content protection
of the Bluetooth device connected to the player. If the music
transferred from the Bluetooth device connected is not
compatible with the SCMS-T content protection standard,
deactivate the SCMS-T content protection.
Making the Player Move to Music
(continued)
continued
Customizing the Player