Sony VGN-X505ZP - Manual (Page 101)

Setting up an Ethernet Internet connection
Your computer accommodates both 10BASE-T and 100BASE-TX Ethernet connections, with data transfer speeds of between
10 and 100 Mbps.
To connect an Ethernet cable
1. Locate the multipurpose port on your computer. See Locating Controls and Ports for location information.
2. Plug the VGA/Ethernet adapter into the multipurpose port.
Connecting an Ethernet Cable
3. Plug one end of the Ethernet cable (not supplied) into the VGA/Ethernet adapter's Ethernet port , and the
other end of the cable into the network connection.
To set up an Ethernet connection to the Internet
1. Connect your computer to a network connection.
2. Click Start, point to All Programs, Accessories, Communications, and click New Connection Wizard. The New
Connection Wizard appears.
New Connection Wizard
Page 101