Using ethernet connections – Sony VGN-X505ZP User Manual
Page 105
Using Ethernet connections
For setting up local area networks (LANs), Ethernet is a widely installed technology. Your computer accommodates both
10BASE-T and 100BASE-TX Ethernet connections, with data transfer speeds of between 10 and 100 Mbps.
To connect to a local area network using an Ethernet cable
1.
Locate the multipurpose port on your computer. See
2.
Plug the VGA/Ethernet adapter into the multipurpose port.
Connecting an Ethernet Cable
3.
Plug one end of the Ethernet cable (not supplied) into the VGA/Ethernet adapter's Ethernet port
, and the
other end of the cable into the network connection.
4.
Click Start, point to All Programs, Accessories, Communications, and click Network Setup Wizard. The
Network Setup Wizard appears.
Network Setup Wizard
Page 105