Sony SLT-A99V - Manual (Page 62)

62
Removing the Eyepiece cup
When attaching the FDA-A1AM Angle Finder (sold separately) to the
camera, remove the Eyepiece cup.
Note
• When an FDA-A1AM Angle Finder (sold separately) is attached to the camera,
switch the display between the viewfinder and the LCD screen by setting [FINDER/
LCD Setting] in the
Custom menu to [Manual] and pressing the FINDER/LCD
button. Setting [Eye-Start AF] to [Off] is recommended because the eyepiece
sensors located below the viewfinder may be activated.
Carefully slide the Eyepiece cup off
by pushing on each side of the
Eyepiece cup.
• Put your fingers under the Eyepiece cup,
and slide it upward.