Sony MEX-DV1700U User Manual

Multi disc player

Advertising
background image

Cautions

This unit is designed for negative ground (earth) 12 V

DC operation only.

Do not get the leads under a screw, or caught in moving

parts (e.g. seat railing).

Before making connections, turn the car ignition off to

avoid short circuits.

Connect the yellow and red power supply leads only

after all other leads have been connected.

Run all ground (earth) leads to a common ground

(earth) point.

Be sure to insulate any loose unconnected leads with

electrical tape for safety.

The use of optical instruments with this product will

increase eye hazard.

Notes on the power supply lead (yellow)

When connecting this unit in combination with other

stereo components, the connected car circuit’s rating

must be higher than the sum of each component’s fuse.

When no car circuits are rated high enough, connect

the unit directly to the battery.

Parts Iist

The numbers in the list are keyed to those in the

instructions.

The bracket  and the protection collar  are

attached to the unit before shipping. Before mounting

the unit, use the release keys  to remove the bracket

 from the unit. For details, see “Removing the

protection collar and the bracket ()” on the reverse

side of the sheet.

Keep the release keys for future use as they are

also necessary if you remove the unit from your

car.

Caution

Handle the bracket  carefully to avoid injuring your

fingers.

Catch

Note

Before installing, make sure that the catches on both sides of the bracket

are bent inwards 2 mm (

3

/

32

in). If the catches are straight or bent

outwards, the unit will not be installed securely and may spring out.

Connection example

Notes (-A)

Be sure to connect the ground (earth) lead before connecting the

amplifier.

The alarm will only sound if the built-in amplifier is used.

Connection diagram

To a metal surface of the car

First connect the black ground (earth) lead, then connect the yellow

and red power supply leads.

To the power antenna (aerial) control lead or

power supply lead of antenna (aerial) booster

Notes

It is not necessary to connect this lead if there is no power

antenna (aerial) or antenna (aerial) booster, or with a

manually-operated telescopic antenna (aerial).

When your car has a built-in FM/AM antenna (aerial) in the rear/

side glass, see “Notes on the control and power supply leads.”

To AMP REMOTE IN of an optional power

amplifier

This connection is only for amplifiers. Connecting any other system

may damage the unit.

To a car’s illumination signal

Be sure to connect the black ground (earth) lead to a metal surface

of the car first.

To the +12 V power terminal which is energized

in the accessory position of the ignition switch

Notes

If there is no accessory position, connect to the +12 V power

(battery) terminal which is energized at all times.

Be sure to connect the black ground (earth) lead to a metal

surface of the car first.

When your car has a built-in FM/AM antenna (aerial) in the rear/

side glass, see “Notes on the control and power supply leads.”

To the +12 V power terminal which is energized

at all times

Be sure to connect the black ground (earth) lead to a metal surface

of the car first.

To the parking brake switch cord

Notes on the control and power supply leads

REM OUT lead (blue/white striped) supplies +12 V DC when you turn

on the unit.

When your car has built-in FM/AM antenna (aerial) in the rear/side

glass, connect REM OUT lead (blue/white striped) or the accessory

power supply lead (red) to the power terminal of the existing antenna

(aerial) booster. For details, consult your dealer.

A power antenna (aerial) without a relay box cannot be used with this

unit.

Memory hold connection

When the yellow power supply lead is connected, power will always be

supplied to the memory circuit even when the ignition switch is turned

off.
Notes on speaker connection

Before connecting the speakers, turn the unit off.

Use speakers with an impedance of 4 to 8 ohms, and with adequate

power handling capacities to avoid its damage.

Do not connect the speaker terminals to the car chassis, or connect the

terminals of the right speakers with those of the left speaker.

Do not connect the ground (earth) lead of this unit to the negative (–)

terminal of the speaker.

Do not attempt to connect the speakers in parallel.

Connect only passive speakers. Connecting active speakers (with

built-in amplifiers) to the speaker terminals may damage the unit.

To avoid a malfunction, do not use the built-in speaker leads installed

in your car if the unit shares a common negative (–) lead for the right

and left speakers.

Do not connect the unit’s speaker leads to each other.
Notes on connection

If speaker and amplifier are not connected correctly, “FAILURE”

appears in the display. In this case, make sure the speaker and

amplifier are connected correctly.

If you are to use the monitor for the rear seats, connect the parking

brake switch cord to the ground (earth).

A

SIRIUSXM IN

Satellite radio tuner

(SiriusXM)*

* not supplied

Equipment used in illustrations (not supplied)

*

*

Ч 2

Ч 4

Power amplifier

Front speaker

Subwoofer

Rear speaker

B

4-296-932-11(1)

Multi Disc Player

Installation/Connections

MEX-DV1707U/MEX-DV1700U

REAR / SUB

AUDIO OUT

FRONT

AUDIO OUT

VIDEO OUT

* except for U.S. models

REAR / SUB

AUDIO OUT*

2

FRONT

AUDIO OUT

SIRIUSXM

IN*

5

AUX AUDIO IN

VIDEO OUT

REMOTE

IN*

4

from car antenna (aerial)

REM OUT

Max. supply current 0.4 A

Fuse (10 A)

Blue/white striped

Red

Yellow

White

Green

Purple

White/black striped

Gray/black striped

Green/black striped

Gray

Left

Right

Left

Right

Purple/black striped

*1

*6

Monitor (not supplied)

Light green

*

1

RCA pin cord (not supplied)

*

2

AUDIO OUT can be switched SUB or REAR. For details, see the

supplied Operating Instructions.

*

3

Auxiliary device such as hideaway navigation device, TV tuner

box, etc.

*

4

Separate adaptor may be required.

*

5

U.S. models only.

*

6

For details on connecting to the parking brake switch cord, see

“Connecting the parking brake cord ()” on the reverse side.

PARKING BRAKE

*3

*1

*1

ILLUMINATION

Black

Orange/white striped

Satellite radio tuner

(SiriusXM)*

5

Monitor

(not supplied)

Advertising