Troubleshooting (continued) – Sony DCR-HC36 User Manual

Page 104

Advertising
background image

104

E:\SONY\2659813111\01US07TBS.fm

DCR-HC36/HC46/HC96

2-659-813-11(1)

• In the following settings, still images cannot be recorded on a “Memory Stick Duo” during

tape recording.
– [PROGRES.REC] (DCR-HC96)
– [SMTH INT.REC] (DCR-HC46/HC96)

• For DCR-HC36:

You cannot record still images on the “Memory Stick Duo” using [WIDE SELECT] mode
(p. 54).

The recording angle differs depending on the POWER switch setting position
(DCR-HC46/HC96).

• The recording angle when the POWER switch is set to CAMERA-MEMORY is wider than

when it is set to CAMERA-TAPE.

You cannot record a smooth transition on a tape from the last recorded scene
to the next.

• Perform END SEARCH (p. 39).
• Do not remove the cassette. (The picture will be recorded continuously without a break even

when you turn the power off.)

• Do not record pictures in SP mode and LP mode on the same tape.
• Avoid stopping then recording a movie in the LP mode.

The shutter sound is not heard when you record a still image.

• Set [BEEP] to [ON] (p. 68).

The internal flash does not work (DCR-HC96).

• You cannot use the internal flash with:

– Tape recording
– [SUPER NS]
– [COLOR SLOW S]
– [D. EFFECT]
– [PROGRES.REC]
– [BURST]

• Even if auto flash or

(Auto redeye reduction) is selected, you cannot use the internal flash

with:
– NightShot
– [SPOTLIGHT], [SUNSET&MOON], and [LANDSCAPE] of [PROGRAM AE]
– [EXPOSURE]
– [SPOT METER]

The external flash (optional) does not work (DCR-HC96).

• The power of the flash is not turned on, or the flash is not attached correctly.

[END SEARCH] does not work.

• Do not eject the cassette after recording (p. 39).
• There is nothing recorded on the cassette.

Troubleshooting (Continued)

Advertising
This manual is related to the following products: