Sony DCR-HC36 - Manual (Page 79)

79
E:\SONY\2659813111\01US05BAS.fm
DCR-HC36/HC46/HC96
2-659-813-11(1)
Du
bbi
ng
/E
d
iti
n
g
– When the tape has been recorded in a TV color
system other than that of your camcorder
(p. 122).
– When the write-protect tab of the cassette is set
to SAVE (p. 123).
– On sections recorded in HDV format.
• The Active Interface Shoe has a safety device
for fixing the installed external microphone
(optional) securely. To connect, press down and
push it to the end, and then tighten the screw. To
release, loosen the screw, and then slide it out
while pressing down.
• When you are using the A/V jack (DCR-HC96)
or the internal stereo microphone, the picture
will not be output from the A/V jack. Check the
picture on the LCD screen or the viewfinder.
• For DCR-HC46/HC96:
Do not insert/eject the cassette while your
camcorder is on the Handycam Station. This
may cause a malfunction.
• For DCR-HC96:
When you attach an external microphone
(optional) to the Active Interface Shoe, you can
check the picture and the sound by connecting
your camcorder to a TV or other device using
the A/V connecting cable. Sound you are
recording is not output from your camcorder’s
speaker. Check the sound using a TV or other
device.
Insert a recorded cassette into your
camcorder beforehand.
1
Slide the POWER switch
repeatedly to turn on the PLAY/
EDIT lamp.
2
Touch (Play/Pause) to play
back the tape, then touch it again
at the point where you want to
start recording the sound.
3
Touch t [MENU] t
(EDIT/PLAY) t t [AUD DUB
CTRL] t t [AUDIO DUB].
4
Touch (Play) and start
playing back the audio you want
to record at the same time.
appears while recording the new
sound in stereo 2 (ST2) during the
playback of the tape.
5
Touch (Stop) when you want
to stop recording.
To dub on other scenes, repeat step 2 to
select scenes, then touch [AUDIO
DUB].
6
Touch t .
• To set the end point for audio dubbing,
beforehand, press ZERO SET MEMORY on the
Remote Commander at the scene at which you
want to stop audio dubbing during playback.
After step 2 to 4, the recording stops
automatically at the selected scene.
• You can only record additional audio over a
tape recorded on your camcorder. The sound
may deteriorate when you dub audio on a tape
recorded on other camcorders (including other
DCR-HC36/HC46/HC96 camcorders).
Recording sound
0:00:00:00 60min
AUD DUB CTRL
AUDIO
DUB
X appears.
Continued ,