Sony DCR-HC36 - Manual (Page 18)

18
DCR-HC36/HC46/HC96
2-659-813-11(1)
E:\SONY\2659813111\01US02GET.fm
Step 3: Turning the power on and holding your
camcorder firmly
To record or play back, slide the POWER
switch repeatedly to turn on the respective
lamp.
When using it for the first time, the
[CLOCK SET] screen appears (p. 23).
1
Slide the POWER switch
repeatedly in the direction of the
arrow to turn on the respective
lamp.
For DCR-HC36/HC46:
Remove the lens cap by pressing both
knobs on the sides of the cap.
For DCR-HC96:
The lens cover opens automatically
when the POWER switch is set to
CAMERA-TAPE or CAMERA-
MEMORY.
Lamps that light up
CAMERA-TAPE: To record on a tape.
CAMERA-MEMORY: To record on a
“Memory Stick Duo.”
PLAY/EDIT: To play or edit pictures.
• After you have set the date and time
([CLOCK SET], p. 23), the next time you
turn on the power of your camcorder, the
current date and time will be displayed on
the LCD screen for a few seconds.
2
Hold the camcorder correctly.
3
Ensure a good grip, then fasten
the Grip belt.
POWER
switch
If the POWER
switch is set to OFF
(CHG), slide it while
pressing the green
button.
2
3
1
4