Sony DCR-HC36 - Manual (Page 89)

89
DCR-HC36/HC46/HC96
2-659-813-11(1)
Us
in
g a Com
put
er
E:\SONY\2659813111\01US06COM.fm
Installing the software and “First Step Guide”
on a computer
You need to install the software etc., with
the supplied CD-ROM on your computer
before connecting your camcorder
and your computer. Once installed, no
further installation will be necessary. The
software to be used varies depending on the
computer’s operating system you are using.
Windows computer: Picture Package
(including ImageMixer VCD2)
Macintosh computer: ImageMixer VCD2
For the details on the software, refer to
“First Step Guide.”
Log on as Administrators for installation
for Windows 2000/Windows XP.
1
Confirm that your camcorder is
not connected to the computer.
2
Turn on the computer.
Close all applications running on the
computer before installing the software.
3
Place the CD-ROM in the disc
drive of your computer.
The installation screen appears.
The software version of Picture Package
is displayed as “1.5.”
If the screen does not appear
1 Double-click [My Computer].
2 Double-click [PICTUREPACKAGE]
(Disc drive).*
4
Click [Install].
The software version of Picture Package
is displayed as “1.5.”
Depending on the computer’s operating
system, a message may appear notifying
you that “First Step Guide” cannot be
installed automatically with the
InstallShield Wizard. In such a case,
manually copy “First Step Guide” to
your computer according to the message
instructions.
5
Select the language for the
application to be installed, then
click [Next].
Installing on a Windows
computer
* Drive names (such as (E:)) may vary
depending on the computer.
Continued ,