Fm antenna hookups, Amplifier hookups, Hooking up the system (continued) – Sony ST-SE370 User Manual

Page 6: Connecting a ground wire, Fm antenna, Eon control output, White (l), White (l) red (r) red (r), Tuner amplifier tip (st-se570 only), Tuner amplifier

Advertising
background image

6

Tip

For stations that are difficult to receive, try
repositioning the loop antenna while tuning. Placing
the supplied AM loop antenna near a window will
help improve reception quality.

FM antenna hookups

With an FM outdoor antenna, you can obtain a
higher FM broadcast sound quality. We
recommend that you use the supplied FM wire
antenna only temporarily until you install an
FM outdoor antenna. For the specific location
of the FM ANTENNA terminal, see the
illustration below.

What will I need?

• FM wire antenna (supplied) (1)

• FM outdoor antenna (not supplied) (1) and

75-ohm coaxial cable with IEC female type
connector (not supplied) (1)

Connect the supplied FM wire antenna or an
FM outdoor antenna (not supplied) to one of
the FM terminals on the back of this unit.

IEC female type connector

FM wire antenna

FM outdoor antenna

IEC female type connector

Connecting a ground wire

If you connect an outdoor antenna, be sure to
connect a earth lead (not supplied) to the AM
ANTENNA U terminal (in addition to the AM
loop antenna) for lightning protection.

Amplifier hookups

Connect the tuner to an amplifier. Be sure to
turn off both components before connection.
For the specific location of the terminals, see
the illustration below.

What cables will I need?

• Audio cord (supplied) (1)

White (L)

White (L)

Red (R)

Red (R)

Connect the white plugs to the white (L) jacks
and the red plugs to the red (R) jacks. Insert the
plugs completely into the jacks; incomplete
connections may cause noise.

Tuner

Amplifier

Tip (ST-SE570 only)

If you have a Sony amplifier equipped with an EON
CONTROL IN terminal, use the supplied EON
connecting cord to connect the EON CONTROL
OUT terminal on the tuner to the EON CONTROL
IN terminal on your amplifier. This lets you use the
EON function (see page 13) when listening to other
components.

Tuner

Amplifier

FM ANTENNA

ANTENNA

OUTPUT

EON CONTROL

FM

y

75

COAXIAL

R

L

OUT

AM

ANTENNA

FM

y

75

COAXIAL

AM

ANTENNA

FM

y

75

COAXIAL

AM

EON CONTROL

OUTPUT

ANTENNA

OUTPUT

EON CONTROL

FM

y

75

COAXIAL

R

L

OUT

AM

l

TUNER IN

R

L

OUTPUT

R

L

l

EON CONTROL

OUT

EON CONTROL

IN

Hooking up the system (continued)

Advertising