Sony KDE-50XBR950 - Manual (Page 28)

26
Setup
Basic Connections: Connecting a Cable or Antenna
The way in which you will connect your TV varies, depending on how your
home receives a signal (cable, cable box, antenna) and whether or not you
plan to connect a VCR.
If you are connecting a VCR
s See the connections described on pages 31 and 33.
Cable or Antenna
Only For best results, use this connection if you are connecting a cable or an
antenna and you:
s Do not need a cable box to unscramble channels. (If you have a cable
box, see page 28.)
s Do not intend to connect a VCR. (If you have a VCR, see pages 31 and
33.)
For antenna connection, use the supplied antenna cable.
When using an indoor antenna, such as rabbit-ear or dipole-
antenna, keep the antenna away from the display unit. If not,
noise may appear on the screen.
Note on Using This Connection
If You Are Connecting See Page
Cable or Antenna Only
s No cable box or VCR
26
Cable Box and Cable Only
s Cable box unscrambles only some channels
(usually premium channels)
s No VCR
27
Cable Box Only
s Cable box unscrambles all channels
s No VCR
28
Cable Type Connect As Shown
VHF Only or
combined
VHF/UHF
Cable
VHF/UHF
Antenna
cable
(supplied)
CABLE 75-ohm
coaxial
cable
To Do This ... Do This ...
Switch the TV’s input between
the cable and antenna Press ANT to switch back and forth between the TV’s VHF/UHF and CABLE
inputs.