Sony PFM-42B2H - Manual (Page 98)

46
(GB)
2
Input the index number of the display you want to
operate using the 0 – 9 buttons on the Remote
Commander.
The input number appears right next to the index
number of each display.
I N D E X N o . 1 1 7 1 1 7
3
Press ID MODE SET.
The characters on the selected display change to
cyan while the others change to red.
You can operate only the display specified. (All
operations are available in ID mode except power
on/off.)
4
After the necessary adjustment, press ID MODE
OFF.
The display returns to the normal mode.
To change the index number
You can change the index number if necessary.
When you change the number, use the buttons on the
control button section of the display unit.
1
Press MENU.
The main menu appears on the display panel.
ENTER MENU
M A I N M E N U
I N P U T S E L E C T
P I C C O N T R O L
P I C S I Z E
C O N F I G
M E M O R Y
R E M O T E
S T A T U S
S E L E C T S E T E N D
2
Press v / V to move the cursor (B) to “REMOTE”
and press ENTER.
The REMOTE menu appears on the display panel.
ENTER MENU
R E M O T E
I N D E X N o . : 0 0 1
R E M O T E M O D E : T V
R E M O T E O N L Y : O F F
S E L E C T S E T E N D
3
Press v / V to move the cursor (B) to “INDEX
No.” and press ENTER.
The following menu appears on the display panel.
I N D E X N o . : 0 0 1
4
Select the index number with v / V and press
ENTER.
The menu returns to the REMOTE menu.
Input number
Operating a Specific Display With the Remote Commander