Sony HDR-MV1 - Manual (Page 143)

User Guide
Print Search
Operation Search
Before use
Getting started
Recording
Playback
Playing images on a TV
Saving images with a
computer
Using the Wi-Fi function
Customizing your
camcorder
Troubleshooting
Maintenance and
precautions
Contents list
Top page > Troubleshooting > Troubleshooting > Wi-Fi
Wi-Fi
[Send to Smartphone] is interrupted.
If the battery level is low, shooting with [Send to Smartphone] may terminate
prematurely. Charge the battery pack before use.
The movie shooting screen is not displayed smoothly. The
connection is cut off.
Depending on the radio wave conditions, communication between the
smartphone and camcorder may not work correctly. Close the distance between
the camcorder and smartphone.
Shooting with [Ctrl with Smartphone] terminate
prematurely.
If the battery level is low, shooting with [Ctrl with Smartphone] may terminate
prematurely. Charge the battery pack before use.
The NFC connection does not work.
Change the position of the compatible device to reduce the distance between the
N mark on the smartphone and N mark on the camcorder. If this still does not
solve the problem, move the smartphone a few millimeters, or move the
smartphone away from the camcorder and wait for 10 seconds or more before
touching again.
The camcorder is in the airplane mode. Deactivate the airplane mode.
Make sure that the smartphone is ready for communication. Refer to the
instruction manual of your smartphone for details.
Do not put any metal products other than the smartphone close to the N mark on
the camcorder.
Do not touch the N mark on the camcorder with 2 or more smartphones at the
same time.
When running another application that uses the NFC function on your
smartphone, close the application.
Back to top
Copyright 2013 Sony Corporation
143