Sony VGX-XL1 - Manual (Page 65)

62 VGX-XL1 Digital Living System
7 Install the graphics card. Install the graphics card, connect the cable and
tighten the screw.
8 Install the upper cover. Install the cover and tighten the screws on the back.
9 Connect the power cord and the peripheral devices that were removed in Step
1 and turn on the power to this device.
10 Click the Start button and then point to All Programs, VAIO ® System
Information and then click VAIO ® System Information .
Align clips on both sides
of memory module. Clips on both sides must
fit into the notches on
the memory module.
Chp3.fm Page 62 Thursday, November 10, 2005 11:53 AM