Sony VGX-XL1 - Manual (Page 125)

122 VGX-XL1 Digital Living System
12 Click OK . This completes (Step 3 of 5).
The optical drive door closes and the computer restarts.
The screen Restore Complete System (Step 4 of 5) displays and
automatically starts loading all original system and packaged software that
was pre loaded at the factory.
During this process, you can view some of the application install screens. No
action should be required on your part. However, messages may display
asking you to insert specific program discs to continue.
When the pre installed software has completed loading, the Next button
becomes available.
13 Click Next .
The Restore Complete System (Step 5 of 5) screen appears. Respond to any
active program installation windows that might still be open.
14 Remove any media in the optical disk drive and click Finish to exit VAIO
Recovery and restart your computer.
When your computer restarts, you are guided through a series of screens for
Windows set up.
15 Follow the onscreen instructions. When complete, your computer restarts.
This completes the VAIO ® Recovery option of Restore Complete System.
VAIO Recovery: RAID Options
The following VAIO Recovery options are only available if your computer was
configured for RAID at the time of assembly (Your computer was purchased
“RAID Ready”):
• Reconfigure RAID
• Intel Matrix Storage Console
• Delete a RAID Array
Note : If your computer previously started from the recovery discs, you may
be asked to insert disc 1, click OK .
Note : When you purchased your VAIO® computer, you may have received
actual discs for software that was pre loaded on your computer, such as
Microsoft® Office®. In this case, you will need to reload that software
separately when the recovery is finished.
App C HDD Rec .fm Page 122 Thursday, November 10, 2005 12:57 PM