Sony VGX-XL1 - Manual (Page 149)

146 VGX-XL1 Digital Living System
Power/Start
Event:
Power is not on and green power lamp is not lit.
Comment:
Confirm that the XL1A computer’s power cord is inserted firmly into an outlet.
• Confirm that all of the cables are connected well.
• Remove all the cables connected to this device, and connect them again
after waiting five minutes, then turn the power on again.
• If the device does not run after doing the above, please contact VAIO
Customer Support.
Event:
The power is turned on and the power lamp (green) of theXL1A computer is
on, but there is no display on the screen.
Comment:
• Make sure the proper input for the display unit (TV, DVI-D monitor) is
selected.
• Please confirm that the display unit (TV, DVI-D monitor) power is turned
on.
If nothing is displayed on the screen after a time, please follow the procedures
below.
• Make sure the XL1A computer is connected to the proper input.
• Hold the power button of this device for at least four seconds, make sure
the power lamp turns off and then turn the power on again.
• If nothing is displayed after the above operation, hold the power button of
this device again for at least four seconds, make sure that the power lamp
turns off, then remove all cables connected to this device, and re-connect
after waiting five minutes and then turn the power on again.
App E Troubleshooting.fm Page 146 Thursday, November 10, 2005 1:05 PM