Sony VGX-XL1 - Manual (Page 165)

162 VGX-XL1 Digital Living System
Event:
The sound coming from HDMI™ or S/PDIF does not work.
Comment:
Check the Sound Reality Control Panel.
• Go to the Windows Control Panel, and then from the Category view, select
Sounds, Speech and Audio Devices > Sound Reality Audio.
Make sure the appropriate boxes (HDMI or S/PDIF) are checked.
Wireless LAN
Event:
Cannot use the wireless LAN.
Comment:
Make sure that the wireless LAN function set up correctly and is turned on.
Refer to the Appendix A: Wireless Local AreaNetwork in this guide.
Make sure that the Wireless Zero Configuration service is started. Operate
according to the following procedure.
1 Click Start on the Windows taskbar and click Control Panel. The Control
Panel screen displays.
2 From the Category view, click Performance and Maintenance.
3 Click Administrative Tools.
4 Double-click the Services icon.
5 Check the Wireless Zero Configuration item. The Wireless Zero Configuration
service has started if the condition is Start and type of startup is Automatic.
Start the Wireless Zero Configuration service with the following steps if the
service has not started.
1 Right click Wireless Zero Configuration and click Properties. The
Properties of Wireless Zero Configuration screen displays.
2 Set the type of start-up as Automatic and click Apply.
3 Click Start in service condition.
4 Click OK and close the screen.
App E Troubleshooting.fm Page 162 Thursday, November 10, 2005 1:05 PM