Sony VGX-XL1 - Manual (Page 31)

28 VGX-XL1 Digital Living System
Step 1: Connecting the DLS Computer and Media Changer/
Recorder
Connecting the changer to the computer is a simple process requiring only a
single cable.
Using the supplied i.LINK ® 1
cable, connect the end without the node to an
i.LINK ® connector on the back panel of the XL1A computer, and the end with
the node to an i.LINK ® connector on the back panel of the Media Changer/
Recorder.
Step 2: Connecting your TV
HDMI™ Connector
If your TV has a HDMI™ connector, use the supplied HDMI™ cable and
connect one end to your TV and the other end to the HDMI™ connector on
the back panel of the DLS computer.
DVI-D Connector
If your TV has a DVI-D connector, use the supplied HDMI cable and the
HDMI™ to DVI-D adapter. Insert the adapter into the DVI-D TV/monitor. Then
using the supplied HDMI™ cable, connect one end of the cable to the adapter
and the other end to the HDMI™ connector on the back panel of the XL1A
computer.
Component Connectors (Y, Pb, Pr)
If your TV has component connectors, use a component video cable (not
supplied) and connect one end to the corresponding video outputs on your TV
and on the back panel of the XL1A computer. In this type of connection, there
will be separate audio connections.
Additional Notes:
1. i.LINK is a trademark of Sony used only to designate that a product contains an
IEEE1394 connection. The i.LINK connection may vary depending on the soft-
ware applications, operating system and compatible i.LINK devices. All prod-
ucts with an i.LINK connection may not communicate with each other. Please
refer to the documentation that comes with any device having an i.LINK con-
nection for information on compatibility, operating conditions and proper con-
nection. For information on any Sony device having an i.LINK connection,
contact Sony at 1-800-686-7669.
Chp2.fm Page 28 Thursday, November 10, 2005 11:49 AM