Sony VGX-XL1 - Manual (Page 32)

VGX-XL1 Digital Living System 29
• If your TV has a HDMI™ connector and a DVI-D connector, Sony
recommends using the HDMI™ connector.
• The HDMI cable carries both video and audio signals.
• You cannot use HDMI™ and Component Video connections at the same
time.
• If device drivers other than the ones provided by Sony are used, the image
may not be displayed and the audio may not be heard. Always use the
device driver provided by Sony for updates.
• You can connect the HDMI™ out to an A/V amp and audio will be heard
through the AV amp and then another HDMI™ cable can be connected
from the AV amp to the TV for the display.
Additional TV Connections
Connecting to standard cable access (CATV)
Option 1
1 Connect one end of the TV coaxial cable (optional) to your cable service
access.
2 Connect the other end of the TV coaxial cable to the VHF/UHF port on the
back panel of your computer.
Note : Your VAIO® XL1A computer is supplied with certain video cables.
Depending on your in home cable access, you may require extra cables,
adapters or connection equipment not supplied with your computer.
Chp2.fm Page 29 Thursday, November 10, 2005 11:49 AM