Installing a pci card – Sony VGX-XL1 User Manual

Page 55

Advertising
background image

52

VGX-XL1 Digital Living System

There are delicate electronic components on the expansion card. Don't
drop or allow a strong impact to the expansion card.

Always follow the user's manual for this device when removing the
expansion card. Forcefully removing the expansion card may cause failure
of this device.

Don't get the expansion card wet.

Warning: The entire repair cost will be charged if there is a failure or accident
when installing an expansion card by yourself.

Installing a PCI Card

1

Turn off the power to this device and any peripheral devices, and remove the
power cord and all cables connecting peripheral devices.

Wait about one hour after turning off the power to this device. The inside of
this device may be hot right after the power is turned off and may cause
burns.

2

Remove the upper cover. Then remove the screws at the rear of the unit and
slide the cover off.

Chp3.fm Page 52 Thursday, November 10, 2005 11:53 AM

Advertising
This manual is related to the following products: