Sony VGX-XL1 - Manual (Page 66)

VGX-XL1 Digital Living System 63
Make sure that System Memory displays the correct memory capacity. If the
memory capacity is correct, memory installation is complete. If the memory
capacity has not increased, remove the memory module after turning off the
power to this device, and repeat the procedure to properly install the memory
module again.
Remove Memory Module
Discharge static in your body by touching the metal inside this device, and
then press out and down on the clips on both of the memory slots. Carefully
lift the memory module out of the slot.
Press out and
down.
Chp3.fm Page 63 Thursday, November 10, 2005 11:53 AM