Sony VGX-XL1 - Manual (Page 78)

VGX-XL1 Digital Living System 75
• 5 GHz wireless LAN (IEEE802.11a) technology and 2.4 GHz wireless LAN
(IEEE802.11b/g) technology do not work together due to different
frequencies.
Communicate Using Infrastructure Mode
Wireless LAN Access Point
This device and a wireless LAN access point (sold separately) can be
connected using the following procedure. For details, please refer to Windows
Help.
Further access point settings are required to connect to the Internet or a LAN,
etc. at work via an access point. For details, please refer to the manual
included with the access point you use.
To connect to an access point:
1 Select Turn Radio On by right clicking the red icon in the taskbar notification
area on the lower right desktop screen. The wireless LAN is turned on and the
WLAN (wireless LAN) lamp turns green.
or
When the icon is not displayed in the taskbar notification area, click the
Windows
Start button. Then select All Programs > Marvell ® Wireless
SoftAP > Marvell ® Wireless Soft_g_SoftAP Configuration Utility .
Note : Before setting up your wireless LAN access point, make sure you have
connected the Wireless LAN Antenna to the Wireless LAN Antenna
connector located on the back panel of the XL1A computer.
App A WLAN.fm Page 75 Thursday, November 10, 2005 12:09 PM