Sony VGX-XL1 - Manual (Page 89)

86 VGX-XL1 Digital Living System
Use this device to function as an access point
Set this device to function as an access point for other computers.
To use this device as an access point
1 Select Turn Radio On by right-clicking the red icon in the taskbar notification
area on the lower right desktop screen.
The wireless LAN turns on and the WLAN (wireless LAN) lamp turns green.
Or, If the icon is not displayed in the communication area, click Windows
Start , point to All Programs > Marvell ® Wireless SoftAP and then click
Marvell ® Wireless Soft_g_SoftAP Configuration Utility .
• From the Operation Mode screen, select Station Mode and make sure the
Radio Off check box is unchecked. Proceed to Step 4.
2 Select Select Mode by right-clicking the red icon in the taskbar notification
area on the lower right desktop screen.
The "Select Operation Mode" screen displays.
3 Select Access Point (AP) in the Select Operation Mode screen and click OK .
App A WLAN.fm Page 86 Thursday, November 10, 2005 12:09 PM