You can select the flash setting when you record photos using the built-in flash, or an external flash
(sold separately) that is compatible with your camcorder.

[Camera/Mic]

[

Flash]

[Flash].

2. Select the desired item.

Auto
Automatically flashes when there is insufficient ambient light.

On ( )
Always uses the flash regardless of the surrounding brightness.

Off ( )
Records without flash.

If white circular spots appear on photos

This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are accentuated by
the camcorder’s flash, they appear as white circular spots.
To reduce the white circular spots, light the room and shoot the subject without a flash.

Notes

The recommended distance to the subject when using the built-in flash is approximately 0.3 m to
1.5 m (1 foot to 5 feet).
Remove any dust from the surface of the flash before using it. Flash effect may be impaired if heat
discoloration or dust obscures the lamp.

The flash does not flash while the

(Movie) mode is selected.

A shadow may be produced on photos if you use the flash when you take photos with the
conversion lens (sold separately) attached.

170

Advertising

Popular Brands

Popular manuals