Sony HDR-PJ650V User Manual
Page 256
Fast flashing
There is not enough free spaces for recording images. After storing the images on other media,
delete unnecessary images
, or format the memory card
The image data base file may be damaged.
Check the data base file by selecting
[Setup]
[
Media Settings]
[Repair Img.
DB F.]
the recording medium.
The memory card is damaged.
(Warning indicators pertaining to memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly.
(Warning indicator pertaining to incompatible memory card)
Incompatible memory card is inserted.
(Warning indicator pertaining to the write-protect of the memory card)
The memory card is write-protected.
Access to the memory card was restricted on another device.
(Warning indicator pertaining to the external device)
The image data base file may be damaged.
Check the data base file by selecting
[Setup]
[
Media Settings]
[Repair Img.
DB F.]
the recording medium.
The external device is damaged.
(Warning indicators pertaining to external device formatting)
The external device is damaged.
The external device is not formatted correctly
(Warning indicator pertaining to camera-shake warning)
The amount of lights is not sufficient, so camera-shake easily occurs. Use the flash.
The camcorder is unsteady, so camera-shake easily occurs. Hold the camcorder steady with both
hands and record the image. However, note that the camera-shake warning indicator does not
disappear.
(Warning indicator pertaining to photo recording)
The recording media is full.
Photos cannot be recorded during processing. Wait for a while, then record.
When [
REC Mode] is set to [Highest Quality
], [60p Quality
] (models with NTSC color
system) or [50p Quality
] (models with PAL color system), you cannot capture photos while
256