Charging the battery pack using the ac adaptor, Handycam" user guide – Sony HDR-PJ650V User Manual
Page 42
Search
Saving images with an external
device
Top page > Getting started > Charging the battery pack > Charging the battery pack using the AC
Adaptor
Charging the battery pack using the AC Adaptor
1. Turn off your camcorder by closing the LCD screen, and attach the battery pack (
). (Be sure to
store the viewfinder first.)
Align the indentation on the camcorder and projection on the battery pack, then slide the battery
pack upwards.
2. Connect the AC Adaptor (
) and the power cord (mains lead) (
) to your camcorder and the
wall outlet (wall socket) (
).
A: Align the
mark on the DC plug (
) with that of DC IN jack (
).
The POWER/CHG (charge) (
) lamp turns orange.
The POWER/CHG (charge) lamp turns off when the battery pack is fully charged. Disconnect the
AC Adaptor from the DC IN jack of your camcorder.
Notes
You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.
When attaching a video light (sold separately), it is recommended that you use an NP-FV70 or NP-
FV100 battery pack.
42