Axis Communications 206 - Manual (Page 35)

34 AXIS 206 - System Options
WEP - Key Type - The key types available depend on the access point being used. The
following options are available:
• Manual - Allows you to manually enter the hex key.
• ASCII - In this method the string must be exactly 5 characters for 64-bit WEP and 13
characters for 128-bit WEP.
• Passphrase - The passphrase can contain up to 31 characters. In 64-bit WEP, the
Passphrase generates 4 different keys. For 128-bit WEP, only 1 key is generated, which is
then replicated for all 4 keys. Key generation is not standardized and can differ from brand
to brand. Check that the generated keys are identical to those in your access point - if not
they must be entered manually.
WEP - Active Transmit Key - When using WEP encryption, this selects which of the 4
keys the AXIS 206W uses when transmitting.
SMTP (email)
Enter the host names or addresses for your primary and secondary mail servers in the fields
provided. This allows the camera to send IP address change notification messages via
email.
UPnP™
The AXIS 206 includes support for UPnP™, which is enabled by default. If also enabled on
your computer (Windows ME or XP), the camera will automatically be detected and a new
icon will be added to “My Network Places.”
Note:
UPnP™ must also be enabled on your workstation. To do this, open the Control Panel from the Start Menu
and select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking
Services section. Click Details and then select UPnP™ as the service to add.
LED Settings
The Status indicator LED on the front of the camera can be set to flash at a configurable
interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED
behavior, see page 9, or see the online help.
UPnP™ is a certification mark of the UPnP ™ Implementers Corporation.