Sony HCD-GS100 - Manual (Page 9)

CD
9 US
CD
Loading a CD
You can load up to 60 discs into this unit.
Turn on the system before you load CDs.
1
Open the front cover by pressing
Z PUSH on the front cover.
Disc slot at the loading
position
(located at the very front) Disc number
The disc number* at the loading position
appears in the display. As you turn DISC
SELECT, the disc number changes.
* If you have already loaded discs, the disc
number at the playing position appears. When
you turn DISC SELECT, the displayed disc
number changes to the one at the loading
position.
Disc number
3
Insert a disc with the label side facing
right.
Notes
• Make sure you have loaded the disc into each
slot at a right angle to the rotary table. If the
disc is not put in straight, it may damage the
unit or the disc.
• Make sure the rotary table comes to a complete
stop before loading or removing discs.
With the label
side facing
right
4
Repeat steps 2 and 3 to load additional
discs.
continued
Front cover
2
Turn DISC SELECT (or press DISC – or
DISC + on the remote) until you find the
disc slot where you want to insert a
disc, while checking the disc number
(written beside every slot and also
indicated in the display).