Sony STR-DG600 - Manual (Page 12)

12 US
C:\Documents and
Settings\pc13\Desktop\JC060000_2662260114DG600_US\2662260116\US03CON_STR-DG600-
U.fm masterpage: Left
STR-DG600
2-662-260-11 (6)
Name Function
A AV ?/1 Press to turn on or off the
audio/video components that
the remote is programmed to
operate.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (wj).
B ?/1 Press to turn the receiver on or
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
SLEEP Press ALT (G) and then press
SLEEP to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
C MULTI CH Press to select the audio
directly from the components
connected to the MULTI CH
IN jacks.
D MUSIC Press to select sound fields
(MUSIC).
E E CATEGORY
MODE
Press to select the category
mode for XM Radio (page
67).
F PRESET/
CH/D.SKIP
+/–
Press to
– select preset stations.
– select preset channels of the
TV, VCR, satellite tuner,
Blu-ray disc recorder, or
hard disc recorder.
– skip disc of the CD player,
VCD player, DVD player,
MD deck, or LD player
(multi-disc changer only).
G ALT
Press to light up the button. It
changes the remote key
function to activate the
buttons with orange printing.
Name Function
H -/-- Press to select the channel
entry mode, either one or two
digit of the TV, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner.
DISC Press to select a disc directly
of the CD player or VCD
player (multi-disc changer
only).
SEARCH
MODE Press to select the searching
mode or unit for search
(tracks, index, etc.) of the
DVD player.
I x Press to stop playback of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, or PSX.
J MUTING Press to mute the sound.
K MASTER
VOL +
a)
/–
Press to adjust the volume
level of all speakers at the
same time.
L AMP MENU Press to display the menu of
the receiver. Then, use the
control buttons to perform
menu operations.
M TV/VIDEO Press to select the input signal
(TV input or video input).
N AUTO CAL
Press to activate the Auto
Calibration function.
O WIDE Press ALT (G) and then press
WIDE to select the wide
picture mode.
P TV CH + a)
/– Press to select preset TV
channels.
Q TV VOL
+
a)
/–
Press to adjust the TV volume
level.
R RETURN/
EXIT O
Press to
– return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the VCD player, LD player,
DVD player, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner is
displayed on the TV screen.
US01COV_STR-DG600-U.book Page 12 Thursday, March 16, 2006 11:32 AM