3 turning the camera on/setting the clock, N (18) – Sony NSC-GC1 User Manual
Page 18
18
3 Turning the camera on/setting the clock
1
Open the LCD panel to turn the power on.
• Open and lift the LCD panel up to a 90 degrees angle from the camera (1), then rotate it to the
desired angle (2).
• You can also turn the power on by pressing POWER button.
2
Set the clock with the Multi-selector.
1 Select the date display format with v/V.
2 Select each item with b/B and set the numeric value with v/V.
3 Select [OK].
To turn the power off
Press POWER button.
To change the date and time
Press MENU, and select [Clock Set] in
(Setup 2) (page 63).
Tilt the Multi-selector side to side and up and down to
select, and press the center to set the setting.
1
LCD screen
1
POWER button
2
Multi-selector
MENU button
/
:
/
2
180 degrees (max.)
2
90 degrees (max.)
1
90 degrees (max.)
2