Sony NSC-GC1 - Manual (Page 75)

75
Tr
oub
les
hoo
tin
g
Warning indicators and messages
File protect
• Release the protection (page 44).
Image size over
• You are playing back an image with size
that cannot be played back on your
camera.
Invalid operation
• You are trying to playback a file that is
not compatible with the camera.
• You have selected a function that is not
available for movies.
Turn the power off and on again
• A problem with the lens caused an error.
Enable printer to connect
• [USB Connect] is set to [PictBridge],
however the camera is connected to a
non-PictBridge compliant device.
Check the device.
• The connection is not established.
Disconnect and connect the USB cable
again. If an error message is indicated
on the printer, refer to the operating
instructions supplied with the printer.
Connect to PictBridge device
• You tried to print images before the
printer connection was established.
Connect to a PictBridge compliant
printer.
No printable image
• You tried to execute [DPOF image]
without placing a DPOF (Print order)
mark on the image(s).
• You tried to execute [All In This Folder]
while a folder that holds only movies
was selected. You cannot print movies.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
• Check the printer.
Printer error
• Check the printer.
• Check if the image you want to print is
corrupted.
• The data transmission to the printer may
not be completed yet. Do not disconnect
the USB cable.
Processing
• The printer is canceling the current print
job. You cannot print until it is finished.
This may take time, depending on the
printer.
Unsupported data
• The data is unsupported by the camera
and cannot be played back.