Sony DCR-HC21 - Manual (Page 11)

11
Getting Started
DCR-HC21 2-584-905-11(1)
PUSH button POWER switch
When storing the battery pack
Fully discharge the battery before storing it
for an extended period (p. 79).
To use an outside power source
You can operate your camcorder using the
power from the wall outlet by making the
same connections as you do when charging
the battery pack. The battery pack will not
lose its charge in this case.
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Battery pack Charging time
NP-FP30 (supplied) 115
NP-FP50 125
NP-FP70 155
NP-FP90 220
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FP30
(supplied) 80
105
40
50
NP-FP50 115
150 55
75
NP-FP70 240
310 120
155
NP-FP90 435
550 215
275
• All times measured under the following
conditions:
Top: Recording with LCD screen.
Bottom: Recording with viewfinder LCD panel
closed.
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
Playing time
Approximate time (min.) available when
you use a fully charged battery pack.
Battery pack
LCD panel
opened
LCD panel
closed
NP-FP30
(supplied)
95 120
NP-FP50 135 170
NP-FP70 280 350
NP-FP90 500 620
On the battery pack
• Before changing the battery pack, slide the
POWER switch up to OFF (CHG).
• The CHG (charge) lamp flashes during
charging, or the battery information (p. 23) will
not be correctly displayed under the following
conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is fully discharged. (For
Battery Info only.)
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
power cord is disconnected from the wall outlet.
On the charging/recording/playback time
• The recording and playback time will be
shorter when you use your camcorder in low
temperatures.
• The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
• Times measured with the camcorder at
25°C (77°F). (10 - 30 °C (50 - 86°F) is
recommended.)
Continued 