Sony MHC-RG4SR - Manual (Page 14)

14
Tape
Loading a tape
1
Press TAPE A/B repeatedly to select
deck A or B.
2
Press Z .
3
Insert a tape in deck A or B with the
side you want to play/record facing
forward.
With the side
you want to
play/record
facing forward.
Playing a tape
You can use TYPE I (normal) tape.
1
Load a tape.
To play both decks in succession, press
PLAY MODE on the remote repeatedly
until “RELAY” (Relay Play)* appears in
the display.
2
Press H (or N on the remote).
The tape starts playing.
* After the playback of the front side of deck A,
deck B plays the front side, then stops.
To Do this
Stop play Press x.
Pause Press X. Press again to
resume play.
Fast-forward
or rewind Press m or M.
Remove
the cassette Press Z.
Searching for the beginning of the
current or the next track (AMS)*
To go forward
Press > during playback.
“TAPE A (or TAPE B) >> +1” appears.
To go back
Press . during playback.
“TAPE A (or TAPE B) << –1” appears.
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.