Computers – Sony DSC-P200 User Manual
Page 80
80
The resizing function does not work.
•
You cannot resize movies and Multi Burst images.
You cannot display a DPOF (Print order) mark.
•
You cannot display DPOF (Print order) marks on movies.
You cannot cut a movie.
•
The movie is not long enough to cut (shorter than about two seconds).
•
Cancel the protection (page 38).
•
Still images cannot be cut.
You do not know if the OS of your computer is compatible with the camera.
•
Check “Recommended computer environment” (page 54) for Windows, and “Recommended
environment” (page 64) for Macintosh.
You cannot install the USB driver.
•
In Windows 2000, log on as Administrator (authorized Administrators) (page 55).
Your computer does not recognize your camera.
•
Turn on the camera (
t
step 2 in “Read This First”).
•
Use the AC Adaptor when the battery level is low (
t
step 1 in “Read This First”).
•
Use the supplied cable for multi-use terminal (page 56).
•
Disconnect the cable for multi-use terminal from both the computer and the camera, and
connect it again firmly. Make sure that “USB Mode” is displayed (page 56).
•
Set [USB Connect] to [Normal] in the
(Setup) menu (page 51).
•
Disconnect all equipment other than the keyboard and the mouse from the USB connectors of
your computer.
•
Connect the camera directly to your computer without passing through a USB hub or other
device (page 56).
•
The USB driver is not installed. Install the USB driver (page 55).
•
Your computer does not properly recognize the device because you connected the camera and
your computer with the cable for multi-use terminal before you installed the “USB Driver”
from the supplied CD-ROM. Delete the erroneously recognized device from your computer,
then install the USB driver (see the next item).
Computers