Sony DSC-P200 - Manual (Page 85)

85
Tr
oubl
es
hoot
ing
Warning indicators and messages
If a code starting with a letter of the
alphabet appears, your camera has a self-
diagnosis display. The last two digits
(indicated by
ss ) will differ depending on
the state of the camera.
If you are unable to solve the problem even
after trying the following corrective actions
a few times, contact your Sony dealer or
local authorized Sony service facility.
C:32: ss
• There is trouble with your camera's
hardware. Turn the power off and on
again.
C:13: ss
• The camera cannot read or write data on
the “Memory Stick”. Re-insert the
“Memory Stick” several times.
• An unformatted “Memory Stick” is
inserted. Format the “Memory Stick”
(page 48).
• The inserted “Memory Stick” cannot be
used with your camera, or the data is
damaged. Insert a new “Memory Stick”
(page 88).
E:61: ss
E:91: ss
• A camera malfunction has occurred.
Reset the camera (page 74), then turn
the power on again.
If the following messages appear, follow
the instructions.
Turn the power off and on again
• A problem with the lens has caused an
error.
E
• The battery level is low. Charge the
battery pack (
t step 1 in “Read This
First”). Depending on the conditions of
use or the type of battery pack, the
indicator may flash even though there
are still 5 to 10 minutes of remaining
battery time left.
For "InfoLITHIUM" battery only
• The battery pack is not a
“InfoLITHIUM” type.
System error
• Turn the power off and then on again
(
t step 2 “Read This First”).
No Memory Stick
• Insert a “Memory Stick” ( t step 3
“Read This First”).
Memory Stick error
• Insert the “Memory Stick” correctly.
• The inserted “Memory Stick” cannot be
used in your camera (page 88).
• The “Memory Stick” is damaged.
• The terminal section of the “Memory
Stick” is dirty.
Memory Stick type error
• The inserted “Memory Stick” cannot be
used in your camera (page 88).
Self-diagnosis display Messages