Inserting a battery – Sony PCG-V505DC2K User Manual
Page 13
Inserting a battery
To insert a battery
1.
Turn the computer over, and slide the UNLOCK/LOCK switch on the bottom of the computer to the UNLOCK
position.
2.
Align the grooves on the battery with the tabs on the back of the computer.
Inserting a Battery
3.
Slide the battery into the computer until it clicks into place.
4.
Slide the UNLOCK/LOCK switch into the LOCK position.
Inserting a Battery
If a port replicator is attached to your computer, do not insert or remove the battery. Lifting and turning the
computer with a port replicator attached could cause a temporary loss of power.
Some programs and attached devices prevent the system from automatically entering Hibernate mode. If you are using
battery power, save your data frequently to avoid data loss and manually activate a power saving mode. See
Page 13