Disconnecting a port replicator – Sony PCG-V505DC2K User Manual
Page 90
Disconnecting a Port Replicator
Disconnecting a port replicator when the battery power is low may result in data loss or a computer malfunction. You can
disconnect a port replicator when the computer is off or in a power saving mode (Standby or Hibernate).
When the battery is low, turn off the computer before you disconnect a port replicator.
To disconnect a port replicator
1.
Close any active programs to prevent data loss.
2.
Either turn off the computer or initiate a power saving mode by doing the following:
Pressing the Fn+Esc keys to initiate Standby
Pressing the Fn+F12 keys to initiate Hibernate
3.
Pull the release latches on each side of the port replicator to release the computer from the port replicator.
Releasing a Com puter from a Port Replicator
4.
Lift the computer away from the port replicator.
Disconnecting a Port Replicator
Page 90